The pumps have been remodelled and re-engineered offering the following benefits;

Pedrollo logo inserted in the body pump

Quiet operation due to the anti vibration system between shaft and impeller

More compact

More efficient motor with low energy consumption and lower operating temperature.

Special paint which gives improved resistance against environmental corrosion

Longer life

Pumps can be installed for manual or automatic control using either the unique Presscontrol unit or a pressure tank and switch. Also available is the integral Hydrofresh version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.

MOTOR

Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.

Motor

Enclosure Class PKm65:IP44

Voltage 1 X 240V

Insulation Class F

Speed 2800rpm

Operating Conditions

Pumped Liquid Thin, clean, chemically non aggressive liquids without abrasive particles or fibres

Maximum Fluid Temperature +60C

Maximum Ambient Temperature +40C

Maximum Suction Lift 7m (at sea level)

Pump Information

Model PKm65

Power (kW) 0.5

Maximum Operating Current (A) 3.4

Dimensions (mm) DN1 1

Dimensions (mm) DN2 1

Dimensions (mm) L 235

Dimensions (mm) H 152

Dimensions (mm) H1 63

Dimensions (mm) W 118

Weight (kg) 6.6

Specifications

The Pedrollo PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.