SmartSolar MPPT 250/100 Tr

Ultra Fast Maximum Power Point Tracking
The MPPT 250/100  SmartSolar charger connects to a PV array of 250 Volt Voc (max.), and will automatically detect and charge your 12, 24, or 48V battery bank with charge current 100 A.

Control Your Charger Remotely
The SmartSolar charger MPPT250/100  can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units
The  SmartSolar chargers are equipped with CAN bus ports. This allows for communication with additional SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual  SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

SmartSolar Control Display
The  SmartSolar charger is equipped with a Direct port like other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery.