-3%

UltraSun 200 Liters Non-Pressurized Solar Water Heater


SPECIFICATIONS

Capacity: Hot water 200litres, Cold water 8litres
Inner tank lining: SUS304- 0.5mm stainless steel
Outer cover: Surface Plastic Painting
Insulation: Polythrethane
Vacuum tubes: 20pieces
Mounting: Flat roof mounting set
Heating: 1.5kW Electric Heater in the Solar Hot Water Tank
Absorber Area: 3.28m2

KSh 126,000.00 KSh 130,000.00

UltraSun 200 Liters Non Pressurized Evacuated Vacuum Tube Solar Water Heating System

UltraSun 200 Liters Non Pressurized Evacuated Vacuum Tube Solar Water Heating System are the most efficient water heating systems available. Solar energy is captured in the vacuum sealed glass tube, quickly heating the water in the glass tube. The heated water rises to the top of the pipe and collects in the tank. Even in colder months, evacuated tube systems work very efficiently, minimising reliance on gas or electric boosting. Vacuum glass tubes provide superior daily heat output due to the cylindrical absorber shape always being perpendicular to the sun (Positive Sun Tracking) and insulation properties of the vacuum in the evacuated tube allow up to 97% of the heat from the sun to be retained. The large surface area of the vacuum and high water turbulence within the internal chamber provide rapid transfer of heat to the water flowing through the top manifold. The sealed evacuated tubes and tri-oxide coating provide maximum solar gain even in the coldest areas and during cloudy or overcast days. Compared to the traditional Flat Plate Solar Hot Water Systems, the Ultasun Vacuum Solar Hot Water Systems have the following advantages.

UltraSun 200 Liters Non Pressurized Evacuated Vacuum Tube Solar Water Heating System advantages

  • Capture sunlight more effectively as they have a greater surface area exposed to the sun at any time
  • More efficient in transferring heat
  • Durable and if a tube should be broken, it can be easily and cheaply replaced
  • Provide excellent performance in overcast conditions
  • Require a smaller roof area than comparable flat plate collectors
  • Do not have the same level of corrosion problems as flat plate collectors

SPECIFICATIONS

Capacity: Hot water 200litres, Cold water 8litres
Inner tank lining: SUS304- 0.5mm stainless steel
Outer cover: Surface Plastic Painting
Insulation: Polythrethane
Vacuum tubes: 20pieces
Mounting: Flat roof mounting set
Heating: 1.5kW Electric Heater in the Solar Hot Water Tank
Absorber Area: 3.28m2

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UltraSun 200 Liters Non-Pressurized Solar Water Heater”

There are no reviews yet.

Thank you for visiting Atwin Engineering
//
Edwin
Sales Engineer
//
Sharon
Sales Engineer
How can we help?